BRAKE SYSTEM:
Dual-circuit brake system compliant with ECE R13 regulation. WABCO RSS system with 2S/2M electronic anti-lock braking system. Emergency stop and ramp valve.
TİPPER LIFTING:
Front telescopic cylinder, minimum 45° lifting angle, and cold-drawn, high-strength steel cylinder resistant to pressure at this angle.
ELECTRICAL SYSTEM:
7 x 24-volt lighting system compliant with ECE R48 regulation.
AXLE:
Three axles, each with a capacity of 9 tons, equipped with disc or drum brakes.
AXLE LIFTING:
Automatic axle lifting with air suspension.
TIRE/RIM:
6+1 tires and rims, size 385/65 R 22.5.
PUMP:
Dual rotary gear pump with a capacity of 35-90 min./lt.
HOSES:
R2 steel hoses resistant to a working pressure of 250 bar.
LANDING GEAR:
Double-stage telescopic legs and gearboxes with a dynamic load capacity of 24 tons.
SIDE PROTECTION/GUARD:
Fixed or foldable type compliant with ECE R73 regulation.
MUDGUARD:
Full FRP mud protection on the wheel.
PAINTING:
After sandblasting, double-layer epoxy primer, double-layer fully baked acrylic paint.
ACCESSORİES:
Toolbox, water tank, tire bumper, fire extinguisher cabinet, necessary indicator signs, and optional accessories.
VOLUME
Depending on customer preference, in the range of 20-32 m3.
BUFFER
Flexible buffer designed according to ECE R58 regulation. Optionally, a foldable buffer with pneumatic system.
OIL TANK
Specially designed, gasketed, and filtered oil tank.
FRONT PANEL - REAR DOOR
Wear plate/covering with a hardness of 450 Brinell.
CHASSIS
Imported S700MC or domestically reinforced S355JR chassis.
POOL MATERIAL
Made from HARDOX plate material with a hardness of 450 Brinell.
KING PIN
2-inch detachable flanged towing pin according to ECE R55 regulation.
REAR PALLET
For asphalt carriers, wear plate/covering with a hardness of 450 HB.
FLOOR/SIDE WALLS:
Imported wear plate/covering with a thickness of 5/4 mm, hardness of 450 Brinell.
